Steeda Mustang Cold Air Intake Kit (2010 GT)

More Power. By installing the Steeda 2010 Cold Air Intake on your GT along with a custom tune you can see typical gains of 20 to 25 horsepower and up to 25 ft/lbs of torque at the rear wheels.

Colder Air. Steeda designed this cold air intake system to tie into the stock factory lower cold air scoop for the coolest air charge possible. And they went the extra mile allowing their intake system to accept the stock factory sound tube to reduce under hood noise, if you choose to keep it.

Application. This Steeda Cold Air Intake System is specifically designed for use on the 2010 GT Mustang equipped with a 4.6L V8 engine.

Included Hardware.

* (2) Two hex bolts * (4) Four bolts small * (4) Four bolts large - long * (4) Four bolts large - short * (2) Two bolts mini * (4) Four small washers * (4) Four large washers * (4) Four nuts * (4) Four clamps large * (3) Three clamps small * (1) One piece of hose * (1) One rubber hose connector * (1) One large rubber trim * (1) One small rubber trim * (2) Two brackets * (2) Two small threaded bolt spacers