'99-04 GT Supercharger-less Kit Using a '03/04 Cobra Blower

1999 to 2004 Mustang GT owners have had "Supercharger Envy" ever since the Cobra went with a blower for the 2003/04 model years. How to put this blower on to your GT has been a hot topic of discussion on Internet bulletin boards for years with no one really EVER offering a good solution until now. YOUR WAIT IS OVER!

When Tork Tech began the design process for their current GT supercharger kits they entertained the idea of using the Cobra blower. A guaranteed ongoing availability was one of the reasons why they turned to other blower options but the final design is easily converted back to using a Eaton Cobra blower.

See this link http://shop.torktech.com/faq1.aspx to one of their FAQs for a detailed description of the differences between the factory Cobra M112 blower and the Magnuson MP112 that Tork Tech uses in their full and tuner kits. This link will educate you on the MAJOR differences that dramatically affect performance.

This kit is sold without a Cobra supercharger, hence the name supercharger-less. These and many other peripheral items needed to complete this installation are commonly available at online auction sites, swap meets and other sources. Our kit includes the same cast aluminum lower manifold and intercooler core as the rest of our intercooled kits. The only difference is this manifold has the IC coolant lines coming out the front of the manifold to work with the Cobra supercharger.

Your Cobra supercharger is easily bolted on top of the new manifold. Tork tech also includes their complete 8-rib secondary belt drive assembly with a separate crank pulley to drive the supercharger.

This is required since a stock Cobra blower will stick out too far to be driven with the accessory belt. Using a separate belt solves many problems with this swap and adds flexibility and boost options. Belt slippage is not an issue and we will offer a variety of different size nose pulleys and crank pulleys so you can choose what boost level your engine can handle.

This kit includes all hardware needed to attach the supercharger to the lower manifold, a new thermostat housing and all tubes/hoses needed to attach it, and everything to attach the separate belt drive assembly to the front cover.

This kit is intended to be very budget oriented. For that reason tork tech is not including several items you will need for a successful installation, but may already have or can purchase in good used condition. You will need the following items but they are not included in the kit. Several of them we do offer separately.

1. Larger fuel injectors to meet what ever HP/TQ level you achieve. We expect most who use this kit will easily achieve 350 to 400 HP, depending upon boost level so we suggests at least 42# injectors. But we can calibrate any size you have. Including 39lbs from 03 04 cobra cars. Dont forget this kit needs cutom tuning and we deliver your power hungry needs with sct chips and xcals.

2. Upgraded in-tank fuel pump. Like an svt focus or aviator pump .

3.Air to water heat exchanger.

4.Fluid pump to transfer coolant between the intercooler core and the heat exchanger.

5.Fluid reservoir to allow for a place to add coolant and check fluid level.

6.Coolant lines, hose clamps, engine belts, etc. are not included since we do not know what you plan to use for a heat exchanger, or where you will be mounting it.

7.Complete intake assembly, such as a throttle body, intake tube, MAF, and filter.

8.Custom computer tune

use this link for more pics and info.

http://shop.torktech.com/99-04gtsupercharger-lesskitusinga0304cobrablower-1.aspx